In the last loop, I included a shot of my friend Tom Noddy with one of his marvelous bubbles. That was shot with the TL-120 and some bounce flash, but when I tried to figure out the exposure, I made some gross errors. So why did the pictures come out okay? I apparently made a whole bunch more errors in making my settings. Yes, I’m an idiot. But I’m an extremely lucky idiot.
This year I did some test shots before inviting Tom over again. There’s black velvet hung behind, because the DOF is extremely shallow. I think we had sharpness between about 28 and 32 inches. I had several flash units triggered by slaves, mostly bouncing off the ceiling here. (I’ve been reading the strobist blog a lot lately, and trying to learn more about the use of flash.)
To create this, Tom blows a bubble and catches it on the wand. He blows a second bubble below it, filled with smoke, so the smaller smoke bubble is attached and hanging below the clear bubble. Tom sticks a wet straw through the wall of the top bubble and blows gently, so the air is swirling inside. Then he break the membrane between the 2 bubbles, so now the smoke is inside the bubble with the swirling air, and the smoke is still somewhat concentrated. Finally, he opens a hole in top of the bubble, so the bubble deflates like a balloon, forcing out the swirling smoke. I shot a bunch of these. Every time you shoot one, you watch what it continues to do, and you think, “Dang! It got even better after I fired!”
I like the detail of the swirling smoke, and the saturated colors on the top of the bubble.
You must be authenticated to view comments.